Fermax 9445 Duox 2 wire VEO Monitor 4.3"

Fermax 9445 Duox 2 wire VEO Monitor 4.3"

The VEO monitor is made of high-impact ABS plastic. Texturized finish for easy cleaning and ultraviolet protection to get more resistance to the light. VEO incorporates a 4,3” (16:9) panoramic color TFT screen. Its unique handset design incorporating a magnet enables the user to put it back into position correctly when the call is finished. Its balanced design of pure lines is distinguishing, modern and minimal. VEO integrates in the ambience.

When a call is received, the image appears automatically. When the handset is picked up a conversation with the visitor can take place. The image is de-activated automatically after 90 seconds, or when the handset is put back in position. To open the door, press the button with a key.

Key Features

• Automatic picture capture when the visitor calls (PHOTOCALLER): Yes (1 photo/call, until 150 photos, 368 x 288 pixels). This feature can be enabled by the user.  Disabled by default.
• Guard unit call: Yes (by means of the door release button)
• Auto-on: Yes (with 3 outdoor panels/cameras)
• OSD menu: Yes
• Additional function F1: Yes (Button F1 sends a negative and/or command)
• Additional function F2: Yes (it only sends command, no negative)
• Apartment door bell differentiated from the outdoor panel: Yes
• Connection for additional devices (call extension, light/buzzer activator, etc.): Yes (ref. 2040, ref. 2438, ref. 3267)
• Additional terminals on the same address: Yes, max. 2 additional terminals (additional power supply can be required)
• Doormatic (automatic door release for offices, etc.): No

Adjustments

• Date and time: Yes
• Ring tones selection: Yes (5). Configurable for Block Panel 0, Block Panel 1, General Entrace Panel 0 and Concierge unit.
• Call volume control: Yes (10 levels by OSD menu)
• Do-not-disturb mode: Yes (by OSD menu) + Red led indication
• Audio volume control: Yes (10 levels by OSD menu)
• Brightness, color and contrast control: Yes (by OSD menu)