SSP 10000ST 272Kg External Mortice Maglock

SSP 10000ST 272Kg External Mortice Maglock

Unique Anti-Residual design
When there is no power, there will be no holding force, and the push-off button will pop out immediately, to release the Electromagnetic Lock and the Armature Plate for no residual magnetism.

The fail-safe Electromagnetic Lock design with no mechanical parts but magnetic force to secure and release the doors, suitable for use in areas which required access controlled or egress such as sliding gate etc.

The Electromagnetic Locks are totally sealed in an epoxy filled stainless steel case for water-resistant and vandalresistant purpose. A threaded conduit fitting ensures weather resistant protection of the wiring therefore it is ideal for indoor and outdoor applications, even in severe weather.
We offers up to 600 pounds holding force with jumper pin selectable for 12V or 24V DC dual input voltage. It is the best choice for electronic security industry and system integrators.

• Voltage Tolerance:15%
• Current Draw: 495mA@12Vdc,248mA@24Vdc(at temperature 20C)
• Magnetic bond sensor monitor output (10000STR) (SPDT rated 0.25A@12V DC), remotely monitors the door lock or unlock status. (N.C. Output--Door opened; N.O. Output--Door closed)
• Operating Temperature: -10~55C)14~131F(
• Humidity: 0~95%non-condensing.
• Lock's surface Temperature (when the power is on): (current temperature +20C )
• Holding Force: Up to 600 lbs )272 Kg(
• Dimensions: Magnet:(L) 227, (W) 38, (D) 26mm Armature Plate:(L) 185, (W) 38, (D) 12mm
• Special Finishes for magnet and armature plate: Zinc
• Epoxy Potting Compound: E87252 (S), UL94V-0
• Weight )Approx.(: 2.1 Kg