GJD GJD397 DTECT X 500m repeater unit

GJD GJD397 DTECT X 500m repeater unit

The D-TECT X Repeater can be used to extend the RF range of a D-TECT X detector, or to boost signal in a poor reception area.

The D-TECT X Repeater must be placed within 500 metres line of sight between the D-TECT X detector(s) and D-TECT X Receiver(s). The unit will repeat all signals from D-TECT X detectors within range and as such does not require any programming to function.

Key Features

• The weatherproof IP55 receiver enclosure can be mounted externally or internally up to 500 metres in line of sight to the detectors
• Code recognition programming of each detector is both rapid and simple via a plug-in connector between detector and receiver
• As a system check, every one of up to 16 detectors automatically sends out a signal every 2 or 15 minutes to confirm that they are active. If a return signal is not received from a registered and recognised detector, a ‘RF Loss’ LED switches on and the contact is activated at the receiver
• An RF continuity test mode facility tests the strength of the RF signal from each detector at the receiver location. When it is necessary to conduct a site survey prior to installation, the receiver can be powered temporarily with a PP3 9 V battery
• The D-TECT X receiver is powered by a 12 - 24V AC/DC supply