GJD GJD018 Opal RFX Wirless External PIR for CCTV use

OPAL RFX Wireless Detector

RFX 3 Receiver

Supply

2 x AAA Alkaline batteries 1.5V  (not supplied) Low power - typical  battery life 2 years

Supply 

12VDC @ 35mA nominal (9 to  15VDC max)

Reception

Monitors signal from up to 3 Opal  RFX PIR’s with high selectivity SAW  filter

Transmission 

433.92 MHz frequency - SAW  stabilised 150 metres line-of-sight

Detection Area 

10 to 35m (adjustable) up to 750  sq m

Outputs (CCTV) 

3 x independent volt free outputs. Selectable normally open (form A)  or normally close (form B) 

Timers 0.4 to 60 seconds after last  detection

Coverage 

35m x 30m - 90° multifunction  lens

Adjustment 

180° pan and 90° tilt

Outputs (A) 

3 x independent switching - ve  outputs (24hr) rated @ 25mA - 0.4  seconds on detection

Fresnel lens 

36 zone

Optics 

Double silicon shielded dual  element eliminates 50,000+ lux of  white light 

Outputs (LUX) 

1 x photocell controlled -ve  

switching 

Adjustable: Dusk (2 lux) to 24 hour  Active 60 seconds after last  detection

Mounting 

3m high for multibeam coverage,  6m high for curtain coverage and  1.5m with mask for pet immunity

Tamper 

Housing back and front tamper  volt free output (form B)

Processing 

Intelligent signal processing. Non  volatile memory 16 million possible  identification codes

RF Output 

3 x independent RF/loss of signal  -ve switching rated @250mA

Features 

Area reduction mask (if required)  Detection signal timer output 0.4  to 60 secs.  

Light level signal output 2 lux to  daylight 

Pulse count 1, 2 & 3

Low Battery 

Output - ve switching rated  @250mA

Testing 

Independent channel active  indicators attendance reporting

Processing 

Intelligent digital signal processing Plug in code memory transfer  system  

Non volatile memory

Temperature 

-20° C + 55° C

Enclosure 

IP55 rated 

Ultra violet stabilised high impact  ABS

Temperature 

-20° C + 55° C

Weight 

152 grams

Enclosure 

Weatherproof IP65 ABS housing

Weight 

340 grams